Shed Dormers in Flintshire
We are a dormer specialist, not a general builder who occasionally does roofs — and across Flintshire that focus shows up in the detailing.
Shed Dormers — indicative geometry
Shed Dormers for Flintshire homes
Flintshire is a mix of Victorian and Edwardian terraces, interwar semi-detached houses and post-war bungalows, and each of those wants a different dormer form — which is why we survey before quoting rather than pricing off a photograph.
A shed dormer has one plane, pitched more shallowly than the main roof, running back to meet it. Because there are no hips or valleys it is the cheapest wide dormer to build, and it can stretch across most of a rear elevation without looking like a bolted-on box. It suits 1930s semis and chalet bungalows particularly well.
Key specification
| Typical projection | 2.4m – 7.0m wide |
|---|---|
| Pitch | 15° – 25°, shallower than main roof |
| Roof finish | Interlocking tile, slate or membrane |
| Structure | Rafters spanning to a ridge beam |
Planning and building control in Flintshire
We run the permitted development test on your specific property: set-back from the eaves, height against the ridge, volume allowance and whether an Article 4 direction applies locally.
Building regulations approval is separate and always required. We submit the application, book the inspections around the programme and hand you the completion certificate at the end — the document a buyer's surveyor will ask to see.
Why homeowners in Flintshire use us
We only do dormers. That sounds like a limitation until you have watched a general builder improvise a back gutter on a wet Thursday.
Send us the address and roughly what you are hoping to gain, and we will come back with a realistic answer rather than an optimistic one.
Other dormer work in Flintshire
FAQs
Shed Dormers in Flintshire — FAQs
How wide can a dormer be?
Structurally, as wide as the roof — full-width rear dormers regularly run six to eight metres, carried on a steel ridge beam. The limits are usually planning volume allowances and the setbacks needed at eaves and ridge, rather than what can be built.
What guarantees do you provide?
Structural work carries a ten-year guarantee, GRP and EPDM flat roofing twenty years, windows ten years on frames and sealed units, and lead and zinc work is covered for workmanship for ten years. You also receive the building control completion certificate, which is the document that actually matters when you sell.
Can you build a dormer in winter?
Yes, with adjustments. Temporary weather protection over the scaffold lets structural work continue in most conditions. GRP roofing needs dry conditions above about 5°C to cure properly, so in a cold spell we either sequence it differently or specify EPDM, which is unaffected.
How much does a dormer window cost?
A single flat roof dormer typically runs from around £9,000 to £20,000 supplied and fitted, depending on width, cladding finish and access. A full-width rear dormer on a semi is usually £28,000 to £45,000, and a complete dormer loft conversion including stairs, insulation, plaster and building control sign-off is more commonly £40,000 to £70,000. Our online guide-price tool gives you an indicative range in about a minute.
Does a dormer need building regulations approval?
Yes, always — permitted development covers planning, not building control. A dormer needs approval for structure, thermal performance under Part L, fire escape and protected route under Part B, and stairs under Part K if a staircase is involved. We handle the application, the inspections and the completion certificate.
Find out what your roof will take
A free measured survey in Flintshire tells you what is achievable, what it needs, and what it costs — before you commit to anything.