Hipped Roof Dormers in Flintshire
Our teams install hipped roof dormers throughout Flintshire, handling structure, weatherproofing, glazing and finish as one job with one point of contact.
Hipped Roof Dormers — indicative geometry
Hipped Roof Dormers for Flintshire homes
The housing stock around Flintshire runs to Victorian and Edwardian terraces, interwar semi-detached houses and post-war bungalows — so the first question at survey is always which of those you have, because the structure underneath differs completely.
A hipped dormer slopes on the front and both sides, so no vertical face breaks the roof plane. That makes it visually recessive, which matters enormously on a front elevation or in a conservation area. The trade-off is a narrower window opening for the same overall footprint, because the hips eat into the front face at the head.
Key specification
| Typical projection | 1.2m – 2.4m wide |
|---|---|
| Hip pitch | 40° – 50° typical |
| Roof finish | Plain tile bonnet hips or slate with lead |
| Flashing | Lead soakers, back gutter and apron |
Planning and building control in Flintshire
Whether you need planning permission or a lawful development certificate depends on the elevation, the volume already used and the local authority's Article 4 position — all of which we confirm before design work starts.
Building regulations approval is separate and always required. We submit the application, book the inspections around the programme and hand you the completion certificate at the end — the document a buyer's surveyor will ask to see.
Why homeowners in Flintshire use us
One quotation covers scaffold, structure, weatherproofing, glazing, plastering and sign-off. You are not coordinating four trades who each blame the last one.
Send us the address and roughly what you are hoping to gain, and we will come back with a realistic answer rather than an optimistic one.
Other dormer work in Flintshire
FAQs
Hipped Roof Dormers in Flintshire — FAQs
Can a dormer include an en-suite?
Very often, yes — a full-width or L-shaped dormer usually has enough floor area for a bedroom plus a shower room. The practical constraints are getting soil and waste down to an existing stack, and whether the head height over the shower tray works. Both are settled at survey.
What happens to my existing loft insulation?
It comes out. Insulation at ceiling-joist level is in the wrong place once the loft is a room — the thermal line moves up to the new roof and dormer build-up. We remove and dispose of the old quilt and insulate the new envelope, which is also what makes the room comfortable to use in August.
How long does a dormer take to build?
A single box or flat roof dormer is typically three to five weeks on site. A full-width rear dormer runs five to eight weeks, and an L-shaped dormer on a terrace with an outrigger is closer to seven to ten. A complete dormer loft conversion including the staircase, services and finishes is usually eight to twelve weeks from scaffold up to sign-off.
Can you build a dormer on a bungalow?
Usually yes, and bungalows often give the best results because the spans are wide and there are no party walls. The deciding factor is ridge height: you generally want at least 2.6m from the top of the ceiling joists to the underside of the ridge. We measure this at survey before committing to anything.
Can I put a dormer on the front of my house?
Front-facing dormers are not covered by permitted development and always need a full planning application. Approval depends heavily on the street scene — planners look at whether other dormers already exist on the road, and at proportion, position and materials. Hipped and pitched forms are approved far more often than flat boxes on a front elevation.
Find out what your roof will take
A free measured survey in Flintshire tells you what is achievable, what it needs, and what it costs — before you commit to anything.