Hipped Roof Dormers in Cornwall
Cornwall homeowners come to us for hipped roof dormers that are properly detailed at the junctions — because that is where dormers succeed or fail.
Hipped Roof Dormers — indicative geometry
Hipped Roof Dormers for Cornwall homes
Most of the dormer work we take on around Cornwall is on granite and rendered cottages, Victorian villas and post-war bungalows, where the ridge height and the position of the existing purlins set the limits.
A hipped dormer slopes on the front and both sides, so no vertical face breaks the roof plane. That makes it visually recessive, which matters enormously on a front elevation or in a conservation area. The trade-off is a narrower window opening for the same overall footprint, because the hips eat into the front face at the head.
Key specification
| Typical projection | 1.2m – 2.4m wide |
|---|---|
| Hip pitch | 40° – 50° typical |
| Roof finish | Plain tile bonnet hips or slate with lead |
| Flashing | Lead soakers, back gutter and apron |
Planning and building control in Cornwall
Rear dormers on houses often sit inside permitted development, but the volume allowance is consumed by any previous loft or rear extension — so we check the planning history for the address before we say yes.
Building regulations approval is separate and always required. We submit the application, book the inspections around the programme and hand you the completion certificate at the end — the document a buyer's surveyor will ask to see.
Why homeowners in Cornwall use us
We would rather tell you at survey that your ridge height will not take what you want than take a deposit and find out in week three.
Book the survey, get the fixed written price, and decide in your own time. Nothing about that process commits you to anything.
Other dormer work in Cornwall
FAQs
Hipped Roof Dormers in Cornwall — FAQs
Is scaffolding included in the price?
Yes. Every quotation we issue includes scaffold design, erection, weekly inspection, hire for the programme and dismantling. Scaffold appearing as an extra afterwards is one of the more common complaints about dormer work, so we price it in from the start.
How wide can a dormer be?
Structurally, as wide as the roof — full-width rear dormers regularly run six to eight metres, carried on a steel ridge beam. The limits are usually planning volume allowances and the setbacks needed at eaves and ridge, rather than what can be built.
What guarantees do you provide?
Structural work carries a ten-year guarantee, GRP and EPDM flat roofing twenty years, windows ten years on frames and sealed units, and lead and zinc work is covered for workmanship for ten years. You also receive the building control completion certificate, which is the document that actually matters when you sell.
Can you build a dormer in winter?
Yes, with adjustments. Temporary weather protection over the scaffold lets structural work continue in most conditions. GRP roofing needs dry conditions above about 5°C to cure properly, so in a cold spell we either sequence it differently or specify EPDM, which is unaffected.
How much does a dormer window cost?
A single flat roof dormer typically runs from around £9,000 to £20,000 supplied and fitted, depending on width, cladding finish and access. A full-width rear dormer on a semi is usually £28,000 to £45,000, and a complete dormer loft conversion including stairs, insulation, plaster and building control sign-off is more commonly £40,000 to £70,000. Our online guide-price tool gives you an indicative range in about a minute.
Find out what your roof will take
A free measured survey in Cornwall tells you what is achievable, what it needs, and what it costs — before you commit to anything.