Sash Dormer Windows in Wrexham
We are a dormer specialist, not a general builder who occasionally does roofs — and across Wrexham that focus shows up in the detailing.
Sash Dormer Windows — indicative geometry
Sash Dormer Windows for Wrexham homes
Wrexham is a mix of Victorian and Edwardian terraces, interwar semi-detached houses and post-war bungalows, and each of those wants a different dormer form — which is why we survey before quoting rather than pricing off a photograph.
Dormers on Victorian and Georgian houses were sashes, and a casement in the same hole reads wrong from the pavement immediately. Spiral-balance or traditional cord-and-weight sashes are both available at dormer sizes, in timber or in slim heritage uPVC with run-through horns and putty-line profiles.
Key specification
| Operation | Spiral balance or cord and weight |
|---|---|
| Materials | Timber or heritage uPVC |
| Detailing | Run-through horns, putty-line, astragal bars |
| Glazing | Slim heritage units, 12–14mm |
Planning and building control in Wrexham
We run the permitted development test on your specific property: set-back from the eaves, height against the ridge, volume allowance and whether an Article 4 direction applies locally.
Building regulations approval is separate and always required. We submit the application, book the inspections around the programme and hand you the completion certificate at the end — the document a buyer's surveyor will ask to see.
Why homeowners in Wrexham use us
We only do dormers. That sounds like a limitation until you have watched a general builder improvise a back gutter on a wet Thursday.
If you want to know what your roof will actually take, the survey is free and there is no obligation attached to it.
Other dormer work in Wrexham
FAQs
Sash Dormer Windows in Wrexham — FAQs
Can you build a dormer in winter?
Yes, with adjustments. Temporary weather protection over the scaffold lets structural work continue in most conditions. GRP roofing needs dry conditions above about 5°C to cure properly, so in a cold spell we either sequence it differently or specify EPDM, which is unaffected.
How much does a dormer window cost?
A single flat roof dormer typically runs from around £9,000 to £20,000 supplied and fitted, depending on width, cladding finish and access. A full-width rear dormer on a semi is usually £28,000 to £45,000, and a complete dormer loft conversion including stairs, insulation, plaster and building control sign-off is more commonly £40,000 to £70,000. Our online guide-price tool gives you an indicative range in about a minute.
Does a dormer need building regulations approval?
Yes, always — permitted development covers planning, not building control. A dormer needs approval for structure, thermal performance under Part L, fire escape and protected route under Part B, and stairs under Part K if a staircase is involved. We handle the application, the inspections and the completion certificate.
Why is my dormer leaking?
In our experience the window itself is the cause less than a fifth of the time. Far more often it is the apron flashing at the dormer front, the lead soakers where the cheeks meet the roof slope, the back gutter behind a pitched dormer, or a split at an upstand in the flat covering. Water then tracks along a rafter and appears somewhere else entirely, which is why we trace the path before quoting.
Will a dormer add value to my house?
A properly built and signed-off dormer conversion adding a bedroom and bathroom typically returns a meaningful share of its cost in value, and more in areas where floor space is scarce. The building control completion certificate is what makes the space count as habitable floor area on a valuation — without it, surveyors will not include it.
Find out what your roof will take
A free measured survey in Wrexham tells you what is achievable, what it needs, and what it costs — before you commit to anything.