Pitched Roof Dormers in Shropshire
From the first measured survey to the completion certificate, we run pitched roof dormers projects in Shropshire as a single, managed piece of work.
Pitched Roof Dormers — indicative geometry
Pitched Roof Dormers for Shropshire homes
Because Shropshire is largely Victorian and Edwardian terraces, interwar semi-detached houses and post-war bungalows, the roof pitches and span widths we meet are fairly predictable, and that makes feasibility a quick conversation rather than a guess.
A pitched roof dormer carries its own small ridge and two slopes, tiled or slated to match the main roof. It sheds water the way the rest of the house does, ages the same way, and is very often the only form a conservation officer will accept on a front elevation. You lose a little internal height at the head compared with a flat top, and you gain a roofline that nobody questions.
Key specification
| Typical projection | 1.2m – 3.0m wide |
|---|---|
| Pitch | 35° – 45°, usually matched to main roof |
| Roof finish | Plain tile, pantile or natural slate |
| Flashing | Code 4/5 lead soakers and back gutter |
Planning and building control in Shropshire
Getting the consent route right at the start saves months. We establish whether it is permitted development, a lawful development certificate or a full application on the first visit.
Building regulations approval is separate and always required. We submit the application, book the inspections around the programme and hand you the completion certificate at the end — the document a buyer's surveyor will ask to see.
Why homeowners in Shropshire use us
The completion certificate is part of the deliverable, not an afterthought. It is the document that makes the space count when you come to sell.
Book the survey, get the fixed written price, and decide in your own time. Nothing about that process commits you to anything.
Other dormer work in Shropshire
FAQs
Pitched Roof Dormers in Shropshire — FAQs
Can you build a dormer on a bungalow?
Usually yes, and bungalows often give the best results because the spans are wide and there are no party walls. The deciding factor is ridge height: you generally want at least 2.6m from the top of the ceiling joists to the underside of the ridge. We measure this at survey before committing to anything.
Can I put a dormer on the front of my house?
Front-facing dormers are not covered by permitted development and always need a full planning application. Approval depends heavily on the street scene — planners look at whether other dormers already exist on the road, and at proportion, position and materials. Hipped and pitched forms are approved far more often than flat boxes on a front elevation.
Do you handle the planning application?
Yes. We prepare measured drawings, elevations and sections, submit the application or the lawful development certificate, and deal with the case officer's queries. On conservation and listed work we also put together the heritage justification the application needs.
What is the difference between a dormer and a Velux?
A rooflight sits flush in the roof slope and gives you light without any extra height — you still have a sloping ceiling. A dormer projects out from the roof and creates vertical walls with a level ceiling behind them, so you gain genuinely usable standing space and floor area, not just daylight.
Do you work on listed buildings and in conservation areas?
Yes. That work is detail-led: matching sightlines, glazing bar widths, cill projections and cheek finishes to what survives, and specifying timber, lead and natural slate rather than modern equivalents. We prepare the drawings and heritage statement for listed building consent alongside the planning application.
Find out what your roof will take
A free measured survey in Shropshire tells you what is achievable, what it needs, and what it costs — before you commit to anything.