Lead & Zinc Dormer Roofing in Worcestershire
We design, build and weatherproof lead & zinc dormer roofing for homeowners across Worcestershire, working from first survey through to building control sign-off.
Lead & Zinc Dormer Roofing — indicative geometry
Lead & Zinc Dormer Roofing for Worcestershire homes
Most of the dormer work we take on around Worcestershire is on Victorian and Edwardian terraces, interwar semi-detached houses and post-war bungalows, where the ridge height and the position of the existing purlins set the limits.
Lead fails from thermal movement, not from age — which means bay sizes, code thickness and fixing centres decide whether a dormer roof lasts thirty years or three. We work to Lead Sheet Association guidance on every detail: welted bays, correct laps, chase depths and clip spacing. Standing-seam zinc gives a similar lifespan with a lighter, more contemporary line.
Key specification
| Lead codes | Code 4, 5 and 6 to LSA guidance |
|---|---|
| Bay sizes | Sized to code and orientation |
| Zinc | Standing seam, natural or pre-weathered |
| Substrate | Ventilated deck with separation layer |
Planning and building control in Worcestershire
Rear dormers on houses often sit inside permitted development, but the volume allowance is consumed by any previous loft or rear extension — so we check the planning history for the address before we say yes.
Building regulations approval is separate and always required. We submit the application, book the inspections around the programme and hand you the completion certificate at the end — the document a buyer's surveyor will ask to see.
Why homeowners in Worcestershire use us
We would rather tell you at survey that your ridge height will not take what you want than take a deposit and find out in week three.
Send us the address and roughly what you are hoping to gain, and we will come back with a realistic answer rather than an optimistic one.
Other dormer work in Worcestershire
- Dormer Window Replacement in Worcestershire
- Aluminium Dormer Windows in Worcestershire
- Dormer Cladding in Worcestershire
- Flat Roof Dormers in Worcestershire
- Hipped Roof Dormers in Worcestershire
- L-Shaped Dormers in Worcestershire
- Cat Slide Dormers in Worcestershire
- Velux to Dormer Conversions in Worcestershire
FAQs
Lead & Zinc Dormer Roofing in Worcestershire — FAQs
Do I need planning permission for a dormer window?
Rear dormers on a house often fall under permitted development, provided the dormer is set at least 200mm back from the eaves, sits below the ridge line, uses materials similar in appearance to the existing house, and stays within the volume allowance — 40m³ for a terrace, 50m³ for a semi or detached. Front-facing dormers, flats and maisonettes, listed buildings, conservation areas and any property with an Article 4 direction all need a full planning application. We check the constraints on your specific address before we quote.
Will my roof be open to the weather?
No. The roof is only opened once the scaffold, temporary weather protection and materials are all on site, and the dormer is made weathertight — structure, deck, membrane and temporary glazing — before the crew leaves at the end of the opening-up phase. We do not open a roof on a Friday afternoon.
What is the best roof covering for a flat dormer?
GRP fibreglass and EPDM rubber are the two we specify most. GRP cures into a single seamless laminate with bonded trims and suits small tops with several upstands. EPDM is a one-piece membrane that copes better with movement on larger spans. Both carry twenty-year guarantees; mineral felt is cheaper but has a materially shorter life.
What insulation do dormers need?
Current building regulations want around 0.15–0.18 W/m²K for a new dormer roof and 0.18 W/m²K for the cheeks and front. In practice that is a warm-roof build-up using 100–150mm of PIR insulation above or between the structure, with a continuous vapour control layer on the warm side. Getting the VCL continuous matters more than the insulation thickness.
Can you match my existing roof tiles?
Usually. Most common clay and concrete profiles are still in production or available reclaimed, and we source a match at survey stage so you see it before work starts. Where a discontinued profile cannot be matched exactly, we normally recommend taking tiles from a less visible slope for the dormer and using the closest new match on the hidden elevation.
Find out what your roof will take
A free measured survey in Worcestershire tells you what is achievable, what it needs, and what it costs — before you commit to anything.