Lead & Zinc Dormer Roofing in Hertfordshire
Our teams install lead & zinc dormer roofing throughout Hertfordshire, handling structure, weatherproofing, glazing and finish as one job with one point of contact.
Lead & Zinc Dormer Roofing — indicative geometry
Lead & Zinc Dormer Roofing for Hertfordshire homes
Roofs across Hertfordshire are dominated by Victorian and Edwardian terraces, interwar semi-detached houses and post-war bungalows, and that mix decides almost everything about what a dormer here needs to look like and how it has to be built.
Lead fails from thermal movement, not from age — which means bay sizes, code thickness and fixing centres decide whether a dormer roof lasts thirty years or three. We work to Lead Sheet Association guidance on every detail: welted bays, correct laps, chase depths and clip spacing. Standing-seam zinc gives a similar lifespan with a lighter, more contemporary line.
Key specification
| Lead codes | Code 4, 5 and 6 to LSA guidance |
|---|---|
| Bay sizes | Sized to code and orientation |
| Zinc | Standing seam, natural or pre-weathered |
| Substrate | Ventilated deck with separation layer |
Planning and building control in Hertfordshire
If the property is in a conservation area or the dormer faces the road, a full planning application is needed. We prepare the drawings and handle the submission either way.
Building regulations approval is separate and always required. We submit the application, book the inspections around the programme and hand you the completion certificate at the end — the document a buyer's surveyor will ask to see.
Why homeowners in Hertfordshire use us
Everything is priced from a measured survey, not a phone call — which is why our quotations tend to be the ones that still hold at the end of the job.
If you want to know what your roof will actually take, the survey is free and there is no obligation attached to it.
Other dormer work in Hertfordshire
FAQs
Lead & Zinc Dormer Roofing in Hertfordshire — FAQs
How long does a dormer take to build?
A single box or flat roof dormer is typically three to five weeks on site. A full-width rear dormer runs five to eight weeks, and an L-shaped dormer on a terrace with an outrigger is closer to seven to ten. A complete dormer loft conversion including the staircase, services and finishes is usually eight to twelve weeks from scaffold up to sign-off.
Can you build a dormer on a bungalow?
Usually yes, and bungalows often give the best results because the spans are wide and there are no party walls. The deciding factor is ridge height: you generally want at least 2.6m from the top of the ceiling joists to the underside of the ridge. We measure this at survey before committing to anything.
Can I put a dormer on the front of my house?
Front-facing dormers are not covered by permitted development and always need a full planning application. Approval depends heavily on the street scene — planners look at whether other dormers already exist on the road, and at proportion, position and materials. Hipped and pitched forms are approved far more often than flat boxes on a front elevation.
Do you handle the planning application?
Yes. We prepare measured drawings, elevations and sections, submit the application or the lawful development certificate, and deal with the case officer's queries. On conservation and listed work we also put together the heritage justification the application needs.
What is the difference between a dormer and a Velux?
A rooflight sits flush in the roof slope and gives you light without any extra height — you still have a sloping ceiling. A dormer projects out from the roof and creates vertical walls with a level ceiling behind them, so you gain genuinely usable standing space and floor area, not just daylight.
Find out what your roof will take
A free measured survey in Hertfordshire tells you what is achievable, what it needs, and what it costs — before you commit to anything.