Hipped Roof Dormers in Powys
We are a dormer specialist, not a general builder who occasionally does roofs — and across Powys that focus shows up in the detailing.
Hipped Roof Dormers — indicative geometry
Hipped Roof Dormers for Powys homes
Roofs across Powys are dominated by Victorian and Edwardian terraces, interwar semi-detached houses and post-war bungalows, and that mix decides almost everything about what a dormer here needs to look like and how it has to be built.
A hipped dormer slopes on the front and both sides, so no vertical face breaks the roof plane. That makes it visually recessive, which matters enormously on a front elevation or in a conservation area. The trade-off is a narrower window opening for the same overall footprint, because the hips eat into the front face at the head.
Key specification
| Typical projection | 1.2m – 2.4m wide |
|---|---|
| Hip pitch | 40° – 50° typical |
| Roof finish | Plain tile bonnet hips or slate with lead |
| Flashing | Lead soakers, back gutter and apron |
Planning and building control in Powys
If the property is in a conservation area or the dormer faces the road, a full planning application is needed. We prepare the drawings and handle the submission either way.
Building regulations approval is separate and always required. We submit the application, book the inspections around the programme and hand you the completion certificate at the end — the document a buyer's surveyor will ask to see.
Why homeowners in Powys use us
Everything is priced from a measured survey, not a phone call — which is why our quotations tend to be the ones that still hold at the end of the job.
If you want to know what your roof will actually take, the survey is free and there is no obligation attached to it.
Other dormer work in Powys
FAQs
Hipped Roof Dormers in Powys — FAQs
Will a dormer add value to my house?
A properly built and signed-off dormer conversion adding a bedroom and bathroom typically returns a meaningful share of its cost in value, and more in areas where floor space is scarce. The building control completion certificate is what makes the space count as habitable floor area on a valuation — without it, surveyors will not include it.
Is scaffolding included in the price?
Yes. Every quotation we issue includes scaffold design, erection, weekly inspection, hire for the programme and dismantling. Scaffold appearing as an extra afterwards is one of the more common complaints about dormer work, so we price it in from the start.
How wide can a dormer be?
Structurally, as wide as the roof — full-width rear dormers regularly run six to eight metres, carried on a steel ridge beam. The limits are usually planning volume allowances and the setbacks needed at eaves and ridge, rather than what can be built.
What guarantees do you provide?
Structural work carries a ten-year guarantee, GRP and EPDM flat roofing twenty years, windows ten years on frames and sealed units, and lead and zinc work is covered for workmanship for ten years. You also receive the building control completion certificate, which is the document that actually matters when you sell.
Can you build a dormer in winter?
Yes, with adjustments. Temporary weather protection over the scaffold lets structural work continue in most conditions. GRP roofing needs dry conditions above about 5°C to cure properly, so in a cold spell we either sequence it differently or specify EPDM, which is unaffected.
Find out what your roof will take
A free measured survey in Powys tells you what is achievable, what it needs, and what it costs — before you commit to anything.