Hipped Roof Dormers in County Down
From the first measured survey to the completion certificate, we run hipped roof dormers projects in County Down as a single, managed piece of work.
Hipped Roof Dormers — indicative geometry
Hipped Roof Dormers for County Down homes
County Down is a mix of Victorian and Edwardian terraces, interwar semi-detached houses and post-war bungalows, and each of those wants a different dormer form — which is why we survey before quoting rather than pricing off a photograph.
A hipped dormer slopes on the front and both sides, so no vertical face breaks the roof plane. That makes it visually recessive, which matters enormously on a front elevation or in a conservation area. The trade-off is a narrower window opening for the same overall footprint, because the hips eat into the front face at the head.
Key specification
| Typical projection | 1.2m – 2.4m wide |
|---|---|
| Hip pitch | 40° – 50° typical |
| Roof finish | Plain tile bonnet hips or slate with lead |
| Flashing | Lead soakers, back gutter and apron |
Planning and building control in County Down
We run the permitted development test on your specific property: set-back from the eaves, height against the ridge, volume allowance and whether an Article 4 direction applies locally.
Building regulations approval is separate and always required. We submit the application, book the inspections around the programme and hand you the completion certificate at the end — the document a buyer's surveyor will ask to see.
Why homeowners in County Down use us
We only do dormers. That sounds like a limitation until you have watched a general builder improvise a back gutter on a wet Thursday.
Book the survey, get the fixed written price, and decide in your own time. Nothing about that process commits you to anything.
Other dormer work in County Down
FAQs
Hipped Roof Dormers in County Down — FAQs
Can you build a dormer on a bungalow?
Usually yes, and bungalows often give the best results because the spans are wide and there are no party walls. The deciding factor is ridge height: you generally want at least 2.6m from the top of the ceiling joists to the underside of the ridge. We measure this at survey before committing to anything.
Can I put a dormer on the front of my house?
Front-facing dormers are not covered by permitted development and always need a full planning application. Approval depends heavily on the street scene — planners look at whether other dormers already exist on the road, and at proportion, position and materials. Hipped and pitched forms are approved far more often than flat boxes on a front elevation.
Do you handle the planning application?
Yes. We prepare measured drawings, elevations and sections, submit the application or the lawful development certificate, and deal with the case officer's queries. On conservation and listed work we also put together the heritage justification the application needs.
What is the difference between a dormer and a Velux?
A rooflight sits flush in the roof slope and gives you light without any extra height — you still have a sloping ceiling. A dormer projects out from the roof and creates vertical walls with a level ceiling behind them, so you gain genuinely usable standing space and floor area, not just daylight.
Do you work on listed buildings and in conservation areas?
Yes. That work is detail-led: matching sightlines, glazing bar widths, cill projections and cheek finishes to what survives, and specifying timber, lead and natural slate rather than modern equivalents. We prepare the drawings and heritage statement for listed building consent alongside the planning application.
Find out what your roof will take
A free measured survey in County Down tells you what is achievable, what it needs, and what it costs — before you commit to anything.