Full-Width Rear Dormers in Lincolnshire
Lincolnshire homeowners come to us for full-width rear dormers that are properly detailed at the junctions — because that is where dormers succeed or fail.
Full-Width Rear Dormers — indicative geometry
Full-Width Rear Dormers for Lincolnshire homes
Because Lincolnshire is largely Victorian and Edwardian terraces, interwar semi-detached houses and post-war bungalows, the roof pitches and span widths we meet are fairly predictable, and that makes feasibility a quick conversation rather than a guess.
A full-width rear dormer runs from party wall to party wall, squaring off the entire rear slope. On a standard terrace or semi it typically converts 12–18m² of crawl space into full-height room — enough for a double bedroom and an en-suite. Set back 200mm from the eaves and 500mm below the ridge, it usually falls inside permitted development on a house that has not been extended before.
Key specification
| Typical projection | 4.0m – 8.0m wide |
|---|---|
| Set-back | 200mm from eaves, 500mm below ridge |
| Structure | Steel ridge beam plus floor steels |
| Roof finish | GRP, EPDM or single-ply membrane |
Planning and building control in Lincolnshire
Getting the consent route right at the start saves months. We establish whether it is permitted development, a lawful development certificate or a full application on the first visit.
Building regulations approval is separate and always required. We submit the application, book the inspections around the programme and hand you the completion certificate at the end — the document a buyer's surveyor will ask to see.
Why homeowners in Lincolnshire use us
The completion certificate is part of the deliverable, not an afterthought. It is the document that makes the space count when you come to sell.
The quickest route is a photograph of the rear elevation over WhatsApp — we can usually tell you what is feasible before anyone visits.
Other dormer work in Lincolnshire
FAQs
Full-Width Rear Dormers in Lincolnshire — FAQs
Why is my dormer leaking?
In our experience the window itself is the cause less than a fifth of the time. Far more often it is the apron flashing at the dormer front, the lead soakers where the cheeks meet the roof slope, the back gutter behind a pitched dormer, or a split at an upstand in the flat covering. Water then tracks along a rafter and appears somewhere else entirely, which is why we trace the path before quoting.
Will a dormer add value to my house?
A properly built and signed-off dormer conversion adding a bedroom and bathroom typically returns a meaningful share of its cost in value, and more in areas where floor space is scarce. The building control completion certificate is what makes the space count as habitable floor area on a valuation — without it, surveyors will not include it.
Is scaffolding included in the price?
Yes. Every quotation we issue includes scaffold design, erection, weekly inspection, hire for the programme and dismantling. Scaffold appearing as an extra afterwards is one of the more common complaints about dormer work, so we price it in from the start.
How wide can a dormer be?
Structurally, as wide as the roof — full-width rear dormers regularly run six to eight metres, carried on a steel ridge beam. The limits are usually planning volume allowances and the setbacks needed at eaves and ridge, rather than what can be built.
What guarantees do you provide?
Structural work carries a ten-year guarantee, GRP and EPDM flat roofing twenty years, windows ten years on frames and sealed units, and lead and zinc work is covered for workmanship for ten years. You also receive the building control completion certificate, which is the document that actually matters when you sell.
Find out what your roof will take
A free measured survey in Lincolnshire tells you what is achievable, what it needs, and what it costs — before you commit to anything.