Flat Roof Dormers in Greater Manchester
We design, build and weatherproof flat roof dormers for homeowners across Greater Manchester, working from first survey through to building control sign-off.
Flat Roof Dormers — indicative geometry
Flat Roof Dormers for Greater Manchester homes
The housing stock around Greater Manchester runs to dense Victorian and Edwardian terraces alongside 1930s and 1950s semi-detached suburbs — so the first question at survey is always which of those you have, because the structure underneath differs completely.
A flat roof dormer projects square from the roof slope with a shallow-fall flat top, usually finished in GRP fibreglass, EPDM or single-ply membrane. Because the walls are vertical and the ceiling is level, you keep full standing height right up to the window — which is why it is the default choice on rear elevations where planning is under permitted development.
Key specification
| Typical projection | 1.8m – 6.0m wide |
|---|---|
| Roof fall | 1:80 minimum to the rear |
| Roof finish | GRP, EPDM or single-ply membrane |
| Cheek finish | Tile-hung, GRP, lead, zinc or timber |
Planning and building control in Greater Manchester
Whether you need planning permission or a lawful development certificate depends on the elevation, the volume already used and the local authority's Article 4 position — all of which we confirm before design work starts.
Building regulations approval is separate and always required. We submit the application, book the inspections around the programme and hand you the completion certificate at the end — the document a buyer's surveyor will ask to see.
Why homeowners in Greater Manchester use us
One quotation covers scaffold, structure, weatherproofing, glazing, plastering and sign-off. You are not coordinating four trades who each blame the last one.
If you want to know what your roof will actually take, the survey is free and there is no obligation attached to it.
Other dormer work in Greater Manchester
- Shed Dormers in Greater Manchester
- Box Dormers in Greater Manchester
- Dormer Loft Conversions in Greater Manchester
- Dormer Window Installation in Greater Manchester
- Timber Dormer Windows in Greater Manchester
- Conservation Dormer Windows in Greater Manchester
- Lead & Zinc Dormer Roofing in Greater Manchester
- Gable-Fronted Dormers in Greater Manchester
FAQs
Flat Roof Dormers in Greater Manchester — FAQs
How disruptive is a dormer build?
Less than people expect, because most of the work happens above your ceilings and is reached from the scaffold. The noisy phases are opening up and installing steels, typically two to four days. Once the staircase is cut in there is dust and traffic through the house, and we sheet and protect the route for that period.
Do dormer windows need to be fire escape windows?
In a loft conversion, at least one window in each habitable room generally needs to meet escape requirements — a clear opening of at least 0.33m², minimum 450mm in both height and width, with the bottom of the opening between 800mm and 1100mm above floor level. We specify the opening lights to meet this as standard.
Do I need planning permission for a dormer window?
Rear dormers on a house often fall under permitted development, provided the dormer is set at least 200mm back from the eaves, sits below the ridge line, uses materials similar in appearance to the existing house, and stays within the volume allowance — 40m³ for a terrace, 50m³ for a semi or detached. Front-facing dormers, flats and maisonettes, listed buildings, conservation areas and any property with an Article 4 direction all need a full planning application. We check the constraints on your specific address before we quote.
Will my roof be open to the weather?
No. The roof is only opened once the scaffold, temporary weather protection and materials are all on site, and the dormer is made weathertight — structure, deck, membrane and temporary glazing — before the crew leaves at the end of the opening-up phase. We do not open a roof on a Friday afternoon.
What is the best roof covering for a flat dormer?
GRP fibreglass and EPDM rubber are the two we specify most. GRP cures into a single seamless laminate with bonded trims and suits small tops with several upstands. EPDM is a one-piece membrane that copes better with movement on larger spans. Both carry twenty-year guarantees; mineral felt is cheaper but has a materially shorter life.
Find out what your roof will take
A free measured survey in Greater Manchester tells you what is achievable, what it needs, and what it costs — before you commit to anything.