Dormer Loft Conversions in Dorset
Our teams install dormer loft conversions throughout Dorset, handling structure, weatherproofing, glazing and finish as one job with one point of contact.
Dormer Loft Conversions — indicative geometry
Dormer Loft Conversions for Dorset homes
The housing stock around Dorset runs to Victorian and Edwardian terraces, interwar semi-detached houses and post-war bungalows — so the first question at survey is always which of those you have, because the structure underneath differs completely.
A dormer loft conversion is the whole sequence: steels and a new floor structure, the dormer itself, a compliant staircase, fire-rated doors and a protected escape route, insulation to current Part L, electrics, heating and plaster. Building control sign-off is what turns loft space into habitable floor area on a survey and on a mortgage valuation — and it is the part people skip at their peril.
Key specification
| Floor area gained | 15m² – 30m² typical |
|---|---|
| Head height required | 2.2m+ over the stair landing |
| Structure | Floor steels, ridge beam, new joists |
| Compliance | Part L, Part B fire, Part K stairs |
Planning and building control in Dorset
Whether you need planning permission or a lawful development certificate depends on the elevation, the volume already used and the local authority's Article 4 position — all of which we confirm before design work starts.
Building regulations approval is separate and always required. We submit the application, book the inspections around the programme and hand you the completion certificate at the end — the document a buyer's surveyor will ask to see.
Why homeowners in Dorset use us
One quotation covers scaffold, structure, weatherproofing, glazing, plastering and sign-off. You are not coordinating four trades who each blame the last one.
Send us the address and roughly what you are hoping to gain, and we will come back with a realistic answer rather than an optimistic one.
Other dormer work in Dorset
FAQs
Dormer Loft Conversions in Dorset — FAQs
Can a dormer include an en-suite?
Very often, yes — a full-width or L-shaped dormer usually has enough floor area for a bedroom plus a shower room. The practical constraints are getting soil and waste down to an existing stack, and whether the head height over the shower tray works. Both are settled at survey.
What happens to my existing loft insulation?
It comes out. Insulation at ceiling-joist level is in the wrong place once the loft is a room — the thermal line moves up to the new roof and dormer build-up. We remove and dispose of the old quilt and insulate the new envelope, which is also what makes the room comfortable to use in August.
How long does a dormer take to build?
A single box or flat roof dormer is typically three to five weeks on site. A full-width rear dormer runs five to eight weeks, and an L-shaped dormer on a terrace with an outrigger is closer to seven to ten. A complete dormer loft conversion including the staircase, services and finishes is usually eight to twelve weeks from scaffold up to sign-off.
Can you build a dormer on a bungalow?
Usually yes, and bungalows often give the best results because the spans are wide and there are no party walls. The deciding factor is ridge height: you generally want at least 2.6m from the top of the ceiling joists to the underside of the ridge. We measure this at survey before committing to anything.
Can I put a dormer on the front of my house?
Front-facing dormers are not covered by permitted development and always need a full planning application. Approval depends heavily on the street scene — planners look at whether other dormers already exist on the road, and at proportion, position and materials. Hipped and pitched forms are approved far more often than flat boxes on a front elevation.
Find out what your roof will take
A free measured survey in Dorset tells you what is achievable, what it needs, and what it costs — before you commit to anything.