Dormer Cladding in Cardiff
From the first measured survey to the completion certificate, we run dormer cladding projects in Cardiff as a single, managed piece of work.
Dormer Cladding — indicative geometry
Dormer Cladding for Cardiff homes
Roofs across Cardiff are dominated by Victorian and Edwardian terraces, interwar semi-detached houses and post-war bungalows, and that mix decides almost everything about what a dormer here needs to look like and how it has to be built.
Dormer cheeks take driving rain on a vertical face with no overhang, which is why they are usually the first thing to fail. Re-cladding strips back to the sheathing, checks and replaces any soft timber, adds a fresh breather membrane and battens, and re-covers in your chosen finish. The structure stays; the appearance and the weather resistance are new.
Key specification
| Finishes | Plain tile-hung, slate-hung, lead, zinc, cedar, GRP |
|---|---|
| Build-up | Sheathing, breather membrane, battens, finish |
| Timber check | All studs and noggins probed and replaced as needed |
| Insulation | Upgrade to 0.18 W/m²K available |
Planning and building control in Cardiff
If the property is in a conservation area or the dormer faces the road, a full planning application is needed. We prepare the drawings and handle the submission either way.
Building regulations approval is separate and always required. We submit the application, book the inspections around the programme and hand you the completion certificate at the end — the document a buyer's surveyor will ask to see.
Why homeowners in Cardiff use us
Everything is priced from a measured survey, not a phone call — which is why our quotations tend to be the ones that still hold at the end of the job.
Book the survey, get the fixed written price, and decide in your own time. Nothing about that process commits you to anything.
Other dormer work in Cardiff
FAQs
Dormer Cladding in Cardiff — FAQs
Can you build a dormer on a bungalow?
Usually yes, and bungalows often give the best results because the spans are wide and there are no party walls. The deciding factor is ridge height: you generally want at least 2.6m from the top of the ceiling joists to the underside of the ridge. We measure this at survey before committing to anything.
Can I put a dormer on the front of my house?
Front-facing dormers are not covered by permitted development and always need a full planning application. Approval depends heavily on the street scene — planners look at whether other dormers already exist on the road, and at proportion, position and materials. Hipped and pitched forms are approved far more often than flat boxes on a front elevation.
Do you handle the planning application?
Yes. We prepare measured drawings, elevations and sections, submit the application or the lawful development certificate, and deal with the case officer's queries. On conservation and listed work we also put together the heritage justification the application needs.
What is the difference between a dormer and a Velux?
A rooflight sits flush in the roof slope and gives you light without any extra height — you still have a sloping ceiling. A dormer projects out from the roof and creates vertical walls with a level ceiling behind them, so you gain genuinely usable standing space and floor area, not just daylight.
Do you work on listed buildings and in conservation areas?
Yes. That work is detail-led: matching sightlines, glazing bar widths, cill projections and cheek finishes to what survives, and specifying timber, lead and natural slate rather than modern equivalents. We prepare the drawings and heritage statement for listed building consent alongside the planning application.
Find out what your roof will take
A free measured survey in Cardiff tells you what is achievable, what it needs, and what it costs — before you commit to anything.