Box Dormers in Merseyside
Merseyside homeowners come to us for box dormers that are properly detailed at the junctions — because that is where dormers succeed or fail.
Box Dormers — indicative geometry
Box Dormers for Merseyside homes
Roofs across Merseyside are dominated by Victorian terraces, 1930s semis and a large stock of post-war estate housing, and that mix decides almost everything about what a dormer here needs to look like and how it has to be built.
A box dormer is the plainest form there is: two cheeks, a flat or very shallow top, and a flat front. There is nothing clever about it, which is precisely the point — fewer junctions means fewer places to leak, and a shorter programme on site. Most single-room dormers on post-war housing are box dormers whether or not anyone calls them that.
Key specification
| Typical projection | 1.5m – 3.5m wide |
|---|---|
| Depth | 1.8m – 3.0m into the roof |
| Roof finish | GRP, EPDM or felt |
| Cheek finish | Tile-hung, GRP or vertical cladding |
Planning and building control in Merseyside
If the property is in a conservation area or the dormer faces the road, a full planning application is needed. We prepare the drawings and handle the submission either way.
Building regulations approval is separate and always required. We submit the application, book the inspections around the programme and hand you the completion certificate at the end — the document a buyer's surveyor will ask to see.
Why homeowners in Merseyside use us
Everything is priced from a measured survey, not a phone call — which is why our quotations tend to be the ones that still hold at the end of the job.
The quickest route is a photograph of the rear elevation over WhatsApp — we can usually tell you what is feasible before anyone visits.
Other dormer work in Merseyside
FAQs
Box Dormers in Merseyside — FAQs
Why is my dormer leaking?
In our experience the window itself is the cause less than a fifth of the time. Far more often it is the apron flashing at the dormer front, the lead soakers where the cheeks meet the roof slope, the back gutter behind a pitched dormer, or a split at an upstand in the flat covering. Water then tracks along a rafter and appears somewhere else entirely, which is why we trace the path before quoting.
Will a dormer add value to my house?
A properly built and signed-off dormer conversion adding a bedroom and bathroom typically returns a meaningful share of its cost in value, and more in areas where floor space is scarce. The building control completion certificate is what makes the space count as habitable floor area on a valuation — without it, surveyors will not include it.
Is scaffolding included in the price?
Yes. Every quotation we issue includes scaffold design, erection, weekly inspection, hire for the programme and dismantling. Scaffold appearing as an extra afterwards is one of the more common complaints about dormer work, so we price it in from the start.
How wide can a dormer be?
Structurally, as wide as the roof — full-width rear dormers regularly run six to eight metres, carried on a steel ridge beam. The limits are usually planning volume allowances and the setbacks needed at eaves and ridge, rather than what can be built.
What guarantees do you provide?
Structural work carries a ten-year guarantee, GRP and EPDM flat roofing twenty years, windows ten years on frames and sealed units, and lead and zinc work is covered for workmanship for ten years. You also receive the building control completion certificate, which is the document that actually matters when you sell.
Find out what your roof will take
A free measured survey in Merseyside tells you what is achievable, what it needs, and what it costs — before you commit to anything.