Dormer windows in Rutland
Rutland homeowners come to us for dormer windows and dormer loft conversions that are properly detailed at the junctions — because that is where dormers succeed or fail.
Dormers on Rutland roofs
Most of the dormer work we take on around Rutland is on Victorian and Edwardian terraces, interwar semi-detached houses and post-war bungalows, where the ridge height and the position of the existing purlins set the limits.
We survey the roof before quoting anything. Ridge height, rafter span, purlin position and the condition of the existing structure decide which dormer forms are possible — and there is no substitute for a tape measure in the loft. The survey is free and carries no obligation.
Planning permission in Rutland
Whether you need planning permission or a lawful development certificate depends on the elevation, the volume already used and the local authority's Article 4 position — all of which we confirm before design work starts.
What we do across Rutland
We only do dormers. That sounds like a limitation until you have watched a general builder improvise a back gutter on a wet Thursday.
- New dormers — flat roof, pitched, gable-fronted, hipped, shed, box, L-shaped, eyebrow and cat slide forms
- Full conversions — structure, staircase, insulation, plaster and building control sign-off
- Glazing — uPVC, timber, aluminium, sash and heritage-profile conservation windows
- Cladding and roofing — tile-hung, slate-hung, lead, standing-seam zinc, cedar and GRP
- Repairs — leak tracing, flashing renewal, rot repair and blown unit replacement
Send us the address and roughly what you are hoping to gain, and we will come back with a realistic answer rather than an optimistic one.
Services in Rutland
Every dormer type, locally
Flat Roof Dormers in Rutland
The most space-efficient dormer — a flat-topped box that squares off the roof slope.
Learn morePitched Roof Dormers in Rutland
A miniature pitched roof over the dormer — the traditional, period-correct option.
Learn moreGable-Fronted Dormers in Rutland
A pitched dormer with a vertical gable face — the classic 'dog-house' front elevation.
Learn moreHipped Roof Dormers in Rutland
Three sloping faces instead of a gable — softer, and often easier to get past planning.
Learn moreShed Dormers in Rutland
A single shallow slope running with the main roof — wide, low and understated.
Learn moreFull-Width Rear Dormers in Rutland
Wall-to-wall across the back of the roof — the biggest gain in usable floor area.
Learn moreL-Shaped Dormers in Rutland
A rear dormer joined to a second over the outrigger — the Victorian terrace answer.
Learn moreBox Dormers in Rutland
A simple squared projection — the workhorse dormer for bedrooms and bathrooms.
Learn moreEyebrow Dormers in Rutland
A curved, brow-like swell in the roof — no cheeks, no vertical faces.
Learn moreCat Slide Dormers in Rutland
The main roof continues down past the dormer — a soft, cottage-style profile.
Learn moreDormer Loft Conversions in Rutland
The full job — structure, dormer, stairs, insulation, plaster and building control sign-off.
Learn moreBungalow Dormer Conversions in Rutland
Turn a bungalow's roof void into a first floor — often doubling the footprint.
Learn moreVelux to Dormer Conversions in Rutland
Already have rooflights? Convert the slope to a dormer and gain standing height.
Learn moreDormer Window Installation in Rutland
Supply and fit of the window itself into new or existing dormer openings.
Learn moreDormer Window Replacement in Rutland
Swap tired, draughty or rotten dormer windows without touching the structure.
Learn moreuPVC Dormer Windows in Rutland
Low maintenance, well insulated and the most cost-effective frame for a dormer.
Learn moreTimber Dormer Windows in Rutland
Engineered hardwood or softwood — the right answer on period and listed roofs.
Learn moreAluminium Dormer Windows in Rutland
Thermally broken aluminium — the slimmest frames and the largest possible glass area.
Learn moreSash Dormer Windows in Rutland
Vertical sliding sashes sized and detailed for a dormer opening.
Learn moreConservation Dormer Windows in Rutland
Heritage-profile dormers and glazing for conservation areas and listed buildings.
Learn moreDormer Cladding in Rutland
Re-clad tired dormer cheeks and faces in tile, lead, zinc, timber or GRP.
Learn moreGRP Fibreglass Dormer Roofing in Rutland
Seamless glass-reinforced polyester on flat dormer tops — no joints, no seams.
Learn moreLead & Zinc Dormer Roofing in Rutland
Traditional code lead and standing-seam zinc for dormer roofs, cheeks and flashings.
Learn moreDormer Window Repairs in Rutland
Leaks, rot, failed flashings, blown units and draughts — diagnosed and put right.
Learn moreWhat homeowners say
Judged on the junctions, not the sales pitch
“The survey was the useful bit — he told us the ridge height wouldn't take what we'd been sold elsewhere, and offered a shed dormer instead. Glad we listened.”
— Homeowner, Rutland“Scaffold went up on the Monday, roof was open and weathertight by the Thursday. No drama, no surprises on the invoice.”
— Homeowner, Rutland“We'd had two leaks patched by other firms. They traced it to the back gutter in an hour and it hasn't come back since.”
— Homeowner, RutlandComments shown are representative of feedback received. Verified reviews are being collected from launch.
FAQs
Dormers in Rutland — FAQs
How much does a dormer window cost?
A single flat roof dormer typically runs from around £9,000 to £20,000 supplied and fitted, depending on width, cladding finish and access. A full-width rear dormer on a semi is usually £28,000 to £45,000, and a complete dormer loft conversion including stairs, insulation, plaster and building control sign-off is more commonly £40,000 to £70,000. Our online guide-price tool gives you an indicative range in about a minute.
Will my roof be open to the weather?
No. The roof is only opened once the scaffold, temporary weather protection and materials are all on site, and the dormer is made weathertight — structure, deck, membrane and temporary glazing — before the crew leaves at the end of the opening-up phase. We do not open a roof on a Friday afternoon.
Can you build a dormer on a bungalow?
Usually yes, and bungalows often give the best results because the spans are wide and there are no party walls. The deciding factor is ridge height: you generally want at least 2.6m from the top of the ceiling joists to the underside of the ridge. We measure this at survey before committing to anything.
Why is my dormer leaking?
In our experience the window itself is the cause less than a fifth of the time. Far more often it is the apron flashing at the dormer front, the lead soakers where the cheeks meet the roof slope, the back gutter behind a pitched dormer, or a split at an upstand in the flat covering. Water then tracks along a rafter and appears somewhere else entirely, which is why we trace the path before quoting.
What insulation do dormers need?
Current building regulations want around 0.15–0.18 W/m²K for a new dormer roof and 0.18 W/m²K for the cheeks and front. In practice that is a warm-roof build-up using 100–150mm of PIR insulation above or between the structure, with a continuous vapour control layer on the warm side. Getting the VCL continuous matters more than the insulation thickness.
Do you handle the planning application?
Yes. We prepare measured drawings, elevations and sections, submit the application or the lawful development certificate, and deal with the case officer's queries. On conservation and listed work we also put together the heritage justification the application needs.
Find out what your roof will take
A free measured survey in Rutland tells you what is achievable, what it needs, and what it costs — before you commit to anything.